HPL Toilet Cubicle

Solid Grade Laminate
Solid Grade Laminate, or SGL is both hard wearing and extremely water resistant while also offering antibacterial properties and being easy to wipe clean, making it a popular choice in Hospitals.

SGL Solid Grade Laminate
The panels are constructed from multiple layers of high quality, dyed kraft paper impregnated with thermosetting phenolic resins, giving the panel a characteristic black core appearance. The outer sides are are further layered wih a decorative paper and melamine resin allowing for a variety of colours and textures.
All of these layers together undergo the same heating and high pressure compression as HPL, to form a single high strength, tough and totally waterproof panel. The panel edges are machined to a smooth round profile, forming a complete self supporting panel with outstanding durability.

HPL High Pressure Laminate
A sheet is bonded to both sides of a suitable substrate, such as moisture resistant high density chipboard. For more demanding applications moisture resistant MDF or plywood may be used. The panel is then machined square and the edge lipped with durable, high impact PVC. Alternatively, panels can be post-formed, creating a softly curved edge detail.

MFC Melamine Faced Chipboard
MFC is manufactured with melamine impregnated decorative paper which is bonded under high pressure and temperature to both sides of a substrate – such as moisture resistant high density chipboard. All visible edges are lipped with durable, high impact PVC.

Install gently
Although most materials of HPL toilet cubicle like compact laminate, PVC panel, solid plastic are strong with the features of high density and firmness, it is not suggested to move violently. If the partition inside has been destroyed, even a little bit, its service life would be decreased. The excellent features of different kinds of toilet partition materials can work only in the situation that the materials haven't been broken.

Hardware packs
When caretakers or site managers carry out regular checks, particular attention will be given to the state of cubicle hardware. The locks, handles, coat hooks and hinges see significant use and often need replacement. It's a good idea to have an ample supply of replacement hardware on site.

Clean correctly
There should be a regular cleaning for toilet partition to improve durability even to keep the good appearance. The ways of partitions cleaning should vary for different HPL toilet cubicle materials. For compact laminate, clean with warm water and mild soap or detergent, using a cloth or sponge. For stains that are not removed with the use of mild detergent, use a paste of baking soda and water. However, the use of an abrasive cloth or acidic cleaning solution is not recommended. For particle board, please do not clean with water and alkali soda in order to avoid degumming and being moisture and moldy. You can use the wet dishrag to clean and than make it dry immediately.

Fix Scratches
Nicks, scratches and cuts are inevitable with any high-use product, including solid surface. Minor damage, including scratches, general or chemical stains, scorches or burns, and minor impact marks, can be repaired on-site with a light abrasive cleanser. For heavier damage, light sanding may be necessary. The following steps should be followed: Identify the extent of the damage and ascertain whether a minor repair will solve the problem.

Increase ventilation
Do you think there are always persistent damp problems in washroom? Well you're not alone. The wet humid nature of this environment means this wash space is prone to this kind of issue. Sure, many washroom have high windows kept ajar. But proper ventilation from extractor fans is perhaps your best option for getting moisture to escape the room and eradicate the problem once and for all.
Try to keep and increase the ventilation of washroom, and don't make much water stay at the partition surface for a long time. Otherwise, there would be a degumming problem of partitions and then reduce their service life..

Avoid direct-sun exposure
Being exposed to the sun for a long time is not good for toilet partition maintenance. Increasing ventilation is not meaning to install them in the place under the blazing sun for quite a long time. Some HPL toilet cubicle are easy to fade with the harsh rays of the sun. In addition, some would be out of shape. More seriously, there will be cracks in the surface of toilet partition. That means that kind of partition need to be fixed or exchanged immediately.

Put varnish on solid wood materials
Varnish is a transparent, hard, protective finish or film that is primarily used in wood finishing but also for other materials. Varnish has little or no color, is transparent, and has no added pigment, as opposed to paints or wood stains, which contain pigment and generally range from opaque to translucent. It is suitable to varnish for solid wood toilet partition once every few years. It is not only anti-fading, but also maintaining a slick finish. However, please note that don't varnish too much to make different temperature on the inside and outside. Otherwise, it would make the partition split.

Avoid hot stuff touching
It is not allowed that let something hot and thermal touch the toilet partition directly. Most HPL toilet cubicle are covered with a thin veneer which is easy to be destroyed. There would be blistering and cracking in the surface of toilet partition, especially some partition materials with inferior quality.

Kangbeier Technology Innovation (Shandong) Co., Ltd. was established in 2006. After nearly 20 years of development, it has gradually established five branches, including Shandong Liujun Decoration Materials Co., Ltd., Shandong Liujun International Trade Co., Ltd. (Export Company), Shanghai Kangbeier New Materials Technology Co., Ltd., and Guangdong Alu minum New Materials Co., Ltd. It is a comprehensive company integrating scientific re search, production, sales, international trade and services.

The company is headquartered in Shanghai, China. with two production bases. The first is located in Linyi, Shandong, and the second is located in Guangzhou, China. The main products are Aluminum honeycomb composite materials, including aluminum honeycomb ceiling and wall systems, aluminum honeycomb partition systems, aluminum honeycomb furniture panel systems, and aluminum honeycomb ship RV systems. It is committed to providing high-quality products and services to global users.